Wall panel design: fluted, WPC, charcoal, PVC

Showrooms now sell four kinds of wall panel: fluted panels, WPC louvers, charcoal panels and PVC sheets. They look alike on a display board and behave differently on a wall.

Send an enquiry Call +91 99500 38059

A guide by Terra & Tones, updated

Entry console, Gulmohar House. A round backlit mirror on fluted oak, over a floating console with a black marble top.
Entry console, Gulmohar House

What each panel is

  • Fluted panels. Fluted names the shape, a run of vertical grooves, and says nothing about the material. A fluted panel can be MDF or HDHMR finished in paint, laminate or veneer, or it can be solid timber, WPC or PVC.
  • WPC louvers. Wood-plastic composite, pressed into ribbed planks with a wood-grain film on the face. It resists moisture and termites, and exterior grades go on balconies and front elevations.
  • Charcoal panels. A light plastic panel mixed with charcoal powder, black at the core, with a printed or metallic face. It goes up fast with adhesive.
  • PVC wall panels. Hollow or solid PVC sheets, waterproof and the cheapest of the four. Up close the print reads as plastic, and the sheet moves with heat.
  • Veneer or laminate on plywood. The carpenter's route: plywood or MDF panelling faced in real-wood veneer or laminate. It costs the most and takes the longest, and it is the only one made to the exact size of your wall.

Where each one works

Use veneer or a fluted MDF panel on the walls you look at for hours: the TV wall, the wall behind the bed, the foyer. WPC earns its place where water or sun reaches, such as a balcony ceiling or the wall beside a wash basin. Charcoal and PVC panels suit a quick change on a dry wall.

Keep every plastic panel away from the hob and out of direct afternoon sun, where it can warp. And never panel over a damp wall. The panel hides the patch, the damp keeps spreading behind it, and you find out when the adhesive lets go. Treat the seepage first.

How to make a panelled wall look right

  • One wall. One panelled wall in a room is enough. Two compete.
  • Full height. Run the flutes from floor to ceiling, or stop them at a clear line such as a ledge or a door head.
  • Grazing light. Light the wall from above or from the side. Light that grazes the surface throws a shadow in each groove; a light pointed straight at the wall flattens it.
  • Wider flutes where dust is a worry. Narrow grooves hold the dust of a Gujarat summer and take longer to wipe.
  • Switches first. Fix the switchboards and sockets before the panel goes up, so none lands in the middle of a groove.

Fluted walls in our projects

In Gulmohar House a round backlit mirror hangs on fluted oak in the entry, and a fluted timber dado runs down the hall. Behind the Waterfall Desk, light washes down a fluted wall. In each one the panel covers a single surface and the light does the rest.

Desktop, The Waterfall Desk. A monitor riser, a shelf hung on black rods, and light washing down the fluted wall.
Desktop, The Waterfall Desk

Questions

WPC louvers or charcoal panels: which is better?

WPC is denser, holds a screw and stands up to moisture, so it suits a wall that gets knocked or a semi-open space. Charcoal panels are lighter and cost less, and they dent more easily. On a TV wall in a dry room either works. On a balcony or an exterior, use exterior-grade WPC.

Can wall panels cover a damp wall?

They can hide it, which is the problem. Fix the source of the damp and let the wall dry before any panel goes on. PVC and WPC survive moisture themselves, but the plaster behind them keeps failing.

Do fluted panels collect dust?

Yes, in the grooves. A wider flute and a matte finish make it easier, and a soft brush or a vacuum nozzle clears them. Avoid fluted panels at hand height beside the hob, where dust mixes with oil.

What we design and build

More guides

Tell us about the room

A kitchen, a bedroom, a whole floor. Send a few lines about the space and we will write back.

Enquire